Engineered Oak Flooring Sanding & Worktop Restoration

Before the works...

The oak engineered wood flooring in this Pimlico Property was overall looking tired and in desperate need of restoration. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor sanding and gap filling of 25 sqm oak engineered wood flooring and finishing the floors in matt Lacquer.

How the renovation of the floors went...

One of the challenges we experienced while working on this project, was the amount of furniture, which we had to work around in stages.

Engineered wood flooring is available in 3 options of thickness, each of which can have variable real oak wood top layer. The restoration of the oak floors will start with coarse grid to remove old finish and achieve good, flat level.

Next stage in the process of wood floor sanding was the application of the gap filling. We aim to apply resin filler in the end of the working day, so it settles properly overnight and we can repeat it on the following day , if required. The resin gap filling is after that removed by next step of the finishing process with medium grids .

Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the oak timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.

The engineered wood flooring was consequently sealed with 1 coat of primer and 2 coats of Bona Traffic Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.