-
Wood Floorboards Restoration
-
Pine Wood Floorboards Restoration
-
Pine Wood Floorboards Restoration
-
Wood Floorboards Restoration in Process
Floor sanding of floorboards in Putney
Before the works...
The pine floorboards in this Putney flat was overall looking tired and in urgent need of renovation. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor sanding, of 20 sqm pine floorboards and finishing the floors in matt Lacquer.
How the floor restoration was completed...
The thickness of the pine floorboards used for properties is approx. 20 mm when laid. Pine timber shrinks with the time and also becomes thinner every time the floors are restored. The minimal thickness, after which floorboards cannot be restored any further is approx. 15 mm.
Depending on the overall condition and level throughout, the initial floor sanding of the floorboards may start with coarser or medium grid. The purpose of the introductory floorboards sanding stage is to remove the previous finish and level the floorboards throughout.
Unless the pine floorboards have been sanded in past 10 - 15 years, they will usually not have a good level. Floorboards covered previously by carpets, will be uneven, with larger gaps.
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the pine timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The floorboards was consequently sealed with 1 coat of primer and 3 coats of Junckers HT700 Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.
