Wood Floor Sanding Company in Kensal Green | NW10, NW6

Flooring Advice?

Check our Flooring Guide, which offers various advice in topics like Parquet Flooring Restoration Wood Floor Finishing & Staining Wood Floor Sanding , etc.

• Pine Floorboards Sanding - A Quick DIY Guide
• How to Choose Floor Sanding Company
• Natural Unfinished Timber Look for Your Wooden Floors
• How to Maintain Your Lacquered Wooden Floor
• Benefits of the Oil & Hardwax-Oils

What Commercial Services We Do In Kensal Green?

For our business clients we offer tailored commercial flooring services to the highest industry standards. We have already many local commercial floors in Kensal Green with excellent customer satisfaction rate. Today we continue to provide outstanding commercial flooring services to:

• Floor Renovation for Offices, Retail & Showrooms
• Floor Renovation Services for Museums, Galleries & Theatres
• Floor Restoration for Schools
• Floor Restoration for Restaurants & Pubs
• Floor Restoration for Churches & Community Halls

Whatever the type of flooring and whatever the need for flooring service, contact FloorWorks today, regardless of the size of the project.

See What Our Clients from Kensal Green Say About Us...

• ★★★★★

  An excellent job, very good and friendly workers.

  Ethan Metcalfe, homeowner from St. Albans
• ★★★★★

  An excellent job, very good and friendly people.

  Callum Mills, homeowner from Holborn
• ★★★★★

  You have some great workmen! Keep up the good standard.

  Louise Bolton, homeowner from Seven Sisters

Check Our Latest Flooring Advice Posts...

• How to Maintain Your Lacquered Wooden Floor
• Benefits of the Oil & Hardwax-Oils
• Advice for Wooden Stairs Sanding & Restoration
• What is Bona Mega Evo Lacquer?
• Natural Unfinished Timber Look for Your Wooden Floors

Your Questions Answered..

• Can I seal domestic wooden floors with commercial grade floor lacquer?

  Hi and thank you for your question about the use of commercial grade floor lacquer or oil in domestic properties. The quick answer is yes. However, there are several things you need to consider when choosing the most appropriate floor sealant for your floors.

  Once the floors are properly sanded to a smooth finish, it is extremely important that lacquer is applied right away to ensure that the bare timber is protected from any accidental spillages. Choosing the best type of sealant requires not only consideration of how the floors are expected to be used, but also how often you will be bale to maintain them in the future. While lacquers provide a more durable and hard wearing sealant, it is important to note that they do not allow for local scratch repairs and once floors are damaged, they would need a total resanding and revarnishing. Therefore, some customers prefer the use of wood floor oils, such as Osmo Oils to seal their floors. While oiled floors allow some minor floor scratches to be repaired and reoiled locally, without the need of overall sanding, it is important to note that they do require a regular wood floor re-oiling service to maintain the sealant.

  Should you decide to go for a lacquer rather than oil, we would recommend the commercial grades of some renown varnish producers such as Loba Varnishes, Bona Lacquers and Junckers sealants, which we regularly use for our floor restoration services as they provide high level of protection and durability.

  We hope this information was helpful and don't hesitate to contact us if you need any further assistance or if you would like to book our floor restoration service.

• How many times I can restore my engineered wood floors?

  Hi Richard,

  There are 3 standards of thickness in engineered wood flooring - 20 mm, 18 mm and 14/15 mm. Each of those will have different thickness of top layer (oak, walnut, beech, maple, etc), which will vary between 3 mm and 6 mm.

  Every time engineered wood floors are sanded approx. 1 mm will be removed by the restoration itself, however another 1 mm should be allowed for difference factory defect difference and the level of the floor throughout.

  So, technically - 3 mm top layered floor can be sanded only once and a 6 mm top layer, should be able to achive 3 or even 4 restorations.

• Can you replace damaged original floobroards?

  Yes, as part of our floorboards restoration service it is often required to repair and replace damaged floorboards. Therefore, before we do floorboard sanding, we always inspect the floorboards to make sure that, where needed, wood floor repairs are done before that sanding. As part of our floorboard repairs and replacement services, we always aim to secure any loose floorbaord, but where the board is damaged to an extend beyond repair then we supply and installed reclaimed floorbaords to do a replacement. It is very important that the replacement seasoned floorboards are carefullys elected to match the colour and the sage of your particular flooring as much as possible. This ensures a more uniform appearance once floors are sanded and varnished.

And Some Frequently Asked Questions...

• How long does it take before the floors can be used again after sanding service?

  During the restoration service, the floors can handle light traffic without disrupting the process.

  During the sealing process, the floors can be walked on between coats.

  After the final coat is applied, foot traffic can be handled after 2 hours for lacquered floors and (depending on air humidity / season) 5-8 hours for hardwax-oil.

  Furniture should go back in place on the following day.

• Can I book floor sanding service while I am away on business or holiday?

  While we do offer key collection and return service, we strongly advise that either yourself or a representative on your behalf is available when required for decisions related to colour, finish and furniture, which will require moving around by our team.

  Also, please note that while we take all reasonable care to ensure that your property is safe and secure, we are not responsible for guarding your property, particularly when there are other builders on site. Therefore, please make sure that you discuss any particular arrangements with us in advance if you are planning to be away during a floor sanding service.

• How many coats of oil are included in your service?

  Our standard sanding and oiling service includes 2 coats of clear hardwax-oil or 1 coat of colour oil, followed by 1 coat of clear oil. Occasionally we can increase the number of coats depending on the timber species we are sealing.

  Extra coat of hardwax-oil is also available on request.

Floorworks® in Pictures...

Transform Your Space Today

Don't let tired and worn-out floors detract from the beauty of your space. With exceptional floor sanding services in Kensal Green, you can transform your floors and rejuvenate your home or business. Experience the difference that professional craftsmanship and expertise can make – revitalize your floors today!

FloorWorks in West London...